CYBERSOLV 141-R is a non-flammable, solvent-based cleaning fluid designed for bench-top cleaning needs removing rosin, resin and synthetic polymeric flux residues from electronic circuitry. CYBERSOLV 141-R is ideally suited for cleaning through-hole and SMT electronic assemblies, connectors, cables and hybrid cables.

CYBERSOLV 141-R is self-rinsing, dissolving the contaminant and then readily evaporating after the cleaning application. CYBERSOLV 141-R has very low surface tension making it able to clean narrow traces and under some component gaps. CYBERSOLV 141-R is available in easy-to-use aerosol cans and bulk packaging.

Alternate packaging available in Europe only.
Product Data
Application: PCB CLEANING
Typical Process
Process: Manual
Concentration: 100%
Temperature: Ambient
Rinse: No Rinse Required
Dry: Wipe Optional
Product Properties
pH (10g/L): N/A (Solvent-Based)
Flash Point: None to Boiling
Boiling Point: 117°F / 47°C
Water Soluble: Negligible
VOC, @ 100% 1175 g/L

NOTE: The above process parameters are recommendations based on extensive testing done in KYZEN’s application lab. Your KYZEN sales representative can assist you in optimizing your process parameters.

Fields marked with * are required
Product Supplement
A Representative to Contact Me
Please see comments below
Fields marked with * are required

Process Care Center

Improve productivity with advanced products and services that monitor, manage and control your cleaning processes.