IONOX BC is a semi-aqueous electronics cleaner made from a blend of organic solvents used in both manual stencil cleaning and under stencil wipe applications. IONOX BC is also commonly used for benchtop spot cleaning of reworked PCBs. As a legacy cleaning solution, IONOX BC is effective for removing virtually all types of solder pastes and fluxes including rosin, low residue/no-clean and organic acid, as well as flux core solder wire.

IONOX BC is a non-flammable, low odor concentrated cleaner that is a manufacturer approved solvent for use in automated stencil printer applications. IONOX BC can also be used in immersion systems as well as applied by hand-wipe or coarse spray methods. Rinsing is optional with this product, however, if rinsing is desired or required, DI water, IPA or self-rinse with fresh IONOX BC can be used. IONOX BC is multi-metal safe and has proven compatible with all materials commonly used in electronic assembly manufacturing and cleaning processes.

Product Data
Application: PCB CLEANING
Typical Process
Process: Manual & Immersion
Concentration: 100%
Temperature: <130°F / 54°C
Rinse: Optional
Dry: Air
Product Properties
pH (10g/L): Not Applicable
Flash Point: 162°F / 72°C
Boiling Point: 347°F / 175°C
Water Soluble: Complete
VOC, @ 100% 1039 g/L

NOTE: The above process parameters are recommendations based on extensive testing done in KYZEN’s application lab. Your KYZEN sales representative can assist you in optimizing your process parameters.

×
Fields marked with * are required
Product Supplement
A Representative to Contact Me
Please see comments below
×
Fields marked with * are required

Process Care Center

Improve productivity with advanced products and services that monitor, manage and control your cleaning processes.

×