KYZEN E5314 is a versatile aqueous cleaning product specifically designed to remove non-reflowed solder paste from stencils and solder paste printing hardware. E5314 cleans flux from wave soldering pallets and light oils from assembly equipment and fixtures. KYZEN E5314 exhibits a wide material compatibility profile and does not attack or etch yellow (brass/copper) and white (aluminum) metals.

KYZEN E5314 is a mildly alkaline cleaning agent with positive environmental properties that can be used in spray, soak or ultrasonic cleaning processes. E5314 is engineered with a mixture of inorganic builders and surfactant-based ingredients that has a very low VOC and is essentially odorless. KYZEN E5314 has a long bath life is successful at low concentrations and temperatures making it a product with a low cost of ownership.

Product Data
Application: STENCIL CLEANER / MAINTENANCE
Typical Process
Process: Spray
Concentration: <25%
Temperature: Ambient
Rinse: Recommended DI Water
Dry: Hot Air
Product Properties
pH (10g/L): 10.9
Flash Point: None to Boiling
Boiling Point: 216°F / 102°C
Water Soluble: Complete
VOC, @ 10% 2.9 g/L

NOTE: The above process parameters are recommendations based on extensive testing done in KYZEN’s application lab. Your KYZEN sales representative can assist you in optimizing your process parameters.

×
Fields marked with * are required
Product Supplement
A Representative to Contact Me
Please see comments below
×
Fields marked with * are required

Process Care Center

Improve productivity with advanced products and services that monitor, manage and control your cleaning processes.

×