METALNOX M6060 is an effective pre-treatment chemistry for steel parts, used prior to coating operations for cleaning and phosphatizing, or strictly phosphatizing. Superior results are achieved when M6060 is used in a 5-stage (or more) phosphating coating line. METALNOX M6060 is an extremely low VOC product used in spray or immersion parts cleaning washers.

METALNOX M6060 can greatly enhance the adhesion of oil base and powder coat paint and de-emulsifies to allow oil to separate from the solution. During the final stage of the process, CP90S can be added to M6060 for effective corrosion protection.

Product Data
Application: Specialty Applications
Typical Process
Process: Wipe, Spray, or Immersion
Concentration: Dependent on type of steel and phosphate level required.
Temperature: 130-150°F / 55-65°C
Rinse: Not Required
Dry: Not Applicable
Product Properties
pH (10g/L): 3.1
Flash Point: None to Boiling
Boiling Point: >212°F / 100°C
Water Soluble: Complete
VOC, @ 10% 0.1 g/L

NOTE: The above process parameters are recommendations based on extensive testing done in KYZEN’s application lab. Your KYZEN sales representative can assist you in optimizing your process parameters.

×
Fields marked with * are required
Product Supplement
A Representative to Contact Me
Please see comments below
×
Fields marked with * are required

Process Care Center

Improve productivity with advanced products and services that monitor, manage and control your cleaning processes.

×