KYZEN Booster 86 is an additive designed to stop the formation of and neutralize acidic materials that may form in vacuum degreasing systems while removing chlorine-containing oils. Booster 86 is designed to be added to METALNOX M6386 as needed based on acid acceptance values measured via the KYZEN Acid Stabilizer Kit 86.

KYZEN Booster 86 creates a stable cleaning fluid and is packaged in polyethylene containers. Booster 81 reacts with the free chloride ions, converting these ions to a neutral salt. Use Booster 86 as needed with METALNOX M6386 hydrocarbon cleaning solvent.

Product Data
Application: MF - Process Enhancement Products
Typical Process

• Sump-side add to vacuum degreasers.
• Usage recommendation based on Acid Stabilizer Kit 86 results.
• Process Optimization will be necessary. Please call your KYZEN Representative for assistance.

Product Properties
pH (10g/L): 11.1
Flash Point: 158°F / 70°C
Boiling Point: 340°F / 171°C
Water Soluble: Complete
VOC, @ 10% 88.3 g/L

NOTE: The above process parameters are recommendations based on extensive testing done in KYZEN’s application lab. Your KYZEN sales representative can assist you in optimizing your process parameters.

Fields marked with * are required
Product Supplement
A Representative to Contact Me
Please see comments below
Fields marked with * are required

Process Care Center

Improve productivity with advanced products and services that monitor, manage and control your cleaning processes.