KYZEN Defoamer is an effective de-foaming agent to eliminate foam build-up in aqueous spray cleaners. KYZEN Defoamer has been found to be especially effective for use in captured wash tanks where water-soluble flux residues cause excessive foaming.

KYZEN Defoamer is environmentally friendly and non-flammable presenting minimal work hazards. Due to low volatility, KYZEN Defoamer will stay in solution longer providing an economical solution that is compatible with all materials commonly used in electronic assembly cleaning processes.

Product Data
Application: EAC - Process Enhancement Products
Typical Process

• Sump-side add to aqueous cleaning machines.
• Usage range from 1 to 4 ounces per 100 gallons (29.6 to 118.3 ml per 378.5 liters) depending on your process needs.
• Process Optimization will be necessary. Please call your KYZEN Representative for assistance.

Product Properties
pH (10g/L): N/A (Solvent-Based)
Flash Point: 174°F / 79°C
Boiling Point: 352°F / 178°C
Water Soluble: Not Soluble
VOC, @ 10% 96.4 g/L

NOTE: The above process parameters are recommendations based on extensive testing done in KYZEN’s application lab. Your KYZEN sales representative can assist you in optimizing your process parameters.

Fields marked with * are required
Product Supplement
A Representative to Contact Me
Please see comments below
Fields marked with * are required

Process Control Center

Improve productivity with advanced products and services that monitor, manage and control your cleaning processes.